DSC PowerSeries Neo HS2016-4 User Manual

Chapter 5
NOTE: Verify with your alarm company if this function is required on your system.
To Reset the Sensors
1.
Press and hold on the keypad for 2 seconds. If the reset is successful, the alarm is cancelled.
2. If a smoke detector fails to reset, it may still be detecting an alarm condition. If unsuccessful, the
alarm will reactivate or continue.
- 20 -
5.2 Resetting Smoke Detectors
After having detected an alarm condition smoke detectors require a reset to exit the alarm condition.

DSC PowerSeries Neo HS2016-4 Specifications

General

Brand	DSC
Model	PowerSeries Neo HS2016-4
Category	Security System
Language	English