DSC PowerSeries Neo HS2016-4 User Manual

Chapter 7
7.0 Managing Users
Different user access codes can be programmed in the PowerSeries Neo. The maximum number of user
access codes are as follows:
l 48 for HS2016/HS2016-4
l 72 for HS2032
l 95 for HS2064/HS2128
l 500 for HS2064 E
l 1000 for HS2128 E
Each user access code can be:
l Uniquely labeled.
l Assigned a proximity tag. In order to operate, proximity tags must be enrolled in the system.
l Assigned to only operate specific partitions. For more information on partitions see: "Managing
Partitions".
l Configured with additional attributes. For more information see: "Configuring additional User
Options".
NOTE: Your installer configures all access codes to be either 4, 6, or 8 digits. You cannot have access
codes of all lengths on your system.
Programed zones are indicated on the LCD screen. For more information on user flags see the following
table. On an ICN or LED keypad programmed users will have their digits displayed
LCD Display Indications Description
UserCode01-
- Unprogrammed code
UserCode01P
P Programmed code
UserCode01T
T Code and tag/key are programmed
User Indications
7.1 Access Code Types
The alarm system provides the following user access code types:
Code Add User Delete User Arm Disarm Access Codes User Functions Installer
Master
All All Yes Yes Yes Yes No
User
No No Yes Yes No No No
Supervisor
All but Master All but Master Yes Yes Yes Yes No
Duress
No No Yes Yes No No No
One-time user
No No Yes 1/day No No No
Installer and Master code are system codes that can be changed but not deleted. The other codes are
user-defined and can be added or deleted as necessary. By default, access codes have the same par-
tition and attribute programming as the code used to program them.
NOTE: When using 8-digit access codes, the minimum number of variations are:
l 2083333 for HS2016/HS2016-4
l 1388888 for HS2032
l 1052631 for HS2064/HS2128
l 200000 for HS2064 E
l 100000 for HS2128 E
Additionally, there are no disallowed codes.
Master
Code
By default the master code can access all partitions and can perform any keypad function.
This code can be used to program all access codes, including the supervisor and duress
codes. The master code is code # [01].
User
Codes
This type of access code is used to arm and disarm assigned partitions and can access the
User Functions menu.
- 24 -

DSC PowerSeries Neo HS2016-4 Specifications

General

Brand	DSC
Model	PowerSeries Neo HS2016-4
Category	Security System
Language	English