DSC PowerSeries Neo HS2016-4 User Manual

Chapter 10
10.0 Additional Features
10.1 Turning the Chime ON/OFF
Turning the chime on audibly notifies you whenever an entry/exit sensor is tripped.
To turn the Chime ON or OFF LCD Display
Press to toggle the Chime ON or OFF for the current partition. An access
code may be required to change this setting.
Door Chime
Feature ON
Door Chime
Feature OFF
10.2 Audio Verification
Allows the monitoring station to initiate a 2-way audio (talk/listen) or 1-way audio (listen-in only) session
when an alarm has been received. This feature is used to verify the nature of the alarm or determine the
type of assistance required by the occupant.
NOTE: This is a supplementary feature that has not been investigated by UL/ULC.
NOTE: Must be enabled and configured by installer.
10.3 Visual Verification
Allows the monitoring station to use video clips captured from system motion cameras for verification of
any alarms.
NOTE: This is a supplementary feature that has not been investigated by UL/ULC.
NOTE: Must be enabled and configured by installer.
10.3.1 System Lockout due to Invalid Attempts
If too many invalid access codes are entered, your system can be configured to automatically lock out
inputs from all keypads, wireless and proximity keys, and SMS commands for a specified duration. When
any keys are pressed, an error tone will sound. FMP keys are still active during Keypad Lockout.
NOTE: Feature and lockout duration must be configured by installer.
10.4 Command Outputs
While being useful for many applications, Command outputs are typically configured to operate items
such as garage doors or electric gates. Additionally, Command outputs can be assigned to follow a
schedule configured by your installer.
This is a supplementary feature that has not been investigated by UL/ULC.
Must be configured by installer.
To activate a Command Output:
LCD Display
1. Press [*][7] and if required enter your [access code].
OR
press [*] and use the scroll keys to navigate to Output Control.
Output Control <>
Scroll to View
2. Press the number configured to the command output
OR
use the scroll keys to navigate to the desired command output and
press [*].
Output
Activated
To configure a Command Output to Follow Schedule:
LCD Display
1. Press [*][7]and use the scroll keys to navigate to Follow Schedule
and press [*], followed by your access code.
OR
press [*][7][9][User Code].
Output Control <>
Scroll to View
then
Press (*) to
Follow Schedule
- 38 -

DSC PowerSeries Neo HS2016-4 Specifications

General

Brand	DSC
Model	PowerSeries Neo HS2016-4
Category	Security System
Language	English