16.0 EN50131 Compliance and Certification
This product meets the requirements of Class II, Grade 2 equipment as per EN50131-1: 2006+A1:2009,
EN50131-3:2009, EN50131-6:2008+A1:2014 (Type A), EN50136-1-1:1997, EN50136-2-1, EN50136-2-3
(ATS2) Standards.
This device is suitable for use in systems with the following notification options.
l A (use of two warning devices and internal dialer required
l B (self-powered warning device and internal dialer required
l C (use of DSC compatible alternate communicator in back-up or redundant mode)
l D (use of DSC compatible alternate communicator with encryption enabled required.)
For EN50131 compliant installations only the intrusion portion of the alarm system has been invest-
igated. Fire Alarm and Auxiliary (Medical) Alarm functions were not included in the evaluation of this
product under the requirements of the above mentioned standards. Additional features implemented for
EN 50131 Grade 2:
l Fire alarm and CO alarm annunciation
l Auxiliary (medical) alarm annunciation
l Optional feature implemented for EN 50131 Grade 2:
l Removal from mounting tamper detection for non wire-free components
The models HS2128, HS2064, HS2032, HS2016 Control Panel has been certified by Telefication accord-
ing to EN50131-1:2006 +A1:2009, EN50131-3:2009, EN50131-6:2008+A1:2017 (Type A) and
EN50136-1:1997 (ATS2) for Grade 2, Class II.
Compliance labeling should be removed or adjusted if non-compliant configurations are selected.
- 49 -
To Next Page
Loading...
Need help?
General
