DSC PowerSeries Neo HS2016-4 User Manual

Chapter 4
3. Press [9][9][9]
OR
Scroll to Bypass Options and press [*]. Scroll to Bypass Recall using
the scroll keys and press [*].
Press (*) for <>
Bypass Recall
then
Bypass Recalled
Zones Bypassed
4. To exit bypassing mode press [*].
5. If using an LED or ICN series keypad, the will light and the
bypassed zone #s will be shown. If the system is ready to arm the
Ready indicator will be lit. When arming the system the following
message briefly displays.
* Warning *
Bypass Active
To clear the bypass indication from all zones:
LCD Display
1. Press [*] to enter the function menu.
Press (*) for <>
Zone Bypass
2. Press [*] or [1]. If required enter your [access code].
Zone Bypass <>
(*) To Bypass
3. Press [0][0][0]
OR
Scroll to Clear Bypasses using the [<][>] keys and press [*]. All
bypassed zones will now be open.
Press (*) for <>
Clear Bypasses
then
Bypass Cleared
Zones Unbypassed
4. To exit bypassing mode press [*].
4.9 Bypass Groups
Program frequently bypassed zones into the system as a bypass group. Using bypass groups avoids indi-
vidually bypassing each zone. One bypass group can be programmed per partition.
NOTE: This feature is not to be used in UL listed installations.
To program a Bypass Group:
LCD Display
1. Press [*] to enter the function menu.
Press (*) for <>
Zone Bypass
2. Press [*] or [1]. If required enter your [access code].
Scroll to <>
Bypass Zones
3. Enter the 3 digit zone # of the zones you want bypassed
OR
Scroll to and press [*] to indicate all zones you want bypassed.
Upstrs H Wdw <>
B
4. Press [9][9][5] to program the bypass group with the currently
bypassed zones
OR
Scroll to Bypass Options using the scroll keys and press [*]. Scroll to
Prg Bypass Group and press [*].
Press (*) for <>
Prg Bypass Group
5. The Bypass Group is now programmed. The keypad will beep three
times.
Bypass Group
Programmed
6. To exit bypassing mode and return to the Ready state, press .
System is
Ready to Arm
To load a Bypass Group:
LCD Display
1. Press [*] to enter the function menu.
Press (*) for <>
Zone Bypass
2. Press [*] or [1]. If required enter your [access code].
Scroll to <>
Bypass Zones
- 15 -

DSC PowerSeries Neo HS2016-4 Specifications

General

Brand	DSC
Model	PowerSeries Neo HS2016-4
Category	Security System
Language	English