Ducati MONSTER 1100 S User Manual

68
E
Brake system
If there is excessive play at the brake lever or pedal even
though the brake pads are still in good condition, contact a
Ducati Dealer or Authorized Service Centre to have the
system inspected and any air expelled from the circuit.
Warning
Brake and clutch fluid can damage paintwork and
plastic parts, so avoid contact.
Hydraulic fluid is corrosive and can cause damage and
injuries.
Never mix fluids of different qualities.
Check that the seals are in good condition.
Checking the brake pads for wear (fig. 60)
Front brake
The brake pads are marked with wear indicators so that they
can be checked without removing them from the calipers.
If the grooves in the pad friction material are still visible,
the pad is still in good condition.
Rear brake
The thickness of the friction material on each pad must be at
least 1 mm.
Important
Have the brake pads replaced by a Ducati Dealer or
Authorized Service Centre.
fig. 60

Ducati MONSTER 1100 S Specifications

General

Displacement	1078 cc
Torque	103 Nm (76 lb-ft) @ 6000 rpm
Fuel Injection	Siemens electronic fuel injection, 45 mm throttle body
Transmission	6-speed
Frame	Tubular steel Trellis frame
Front Brake	2 x 320 mm discs, 4-piston radial calipers
Rear Brake	245 mm disc, 2-piston caliper
Seat Height	810mm (31.9 in)
Engine Type	L-Twin, 2 valves per cylinder Desmodromic
Power	70 kW (95 hp) @ 7500 rpm
Front Suspension	43 mm fully adjustable
Rear Suspension	Progressive linkage
Dry Weight	169 kg
Fuel Capacity	15 L