Ducati MONSTER 1100 S User Manual

89
E
Changing bulbs
Before replacing a burnt-out bulb, make sure that the new
one matches the voltage and wattage specifications in
the “Electrical System” paragraph on page 109.
Important
For bulb replacements, contact a Ducati Authorized
Service Centre.
Turn signals
(fig. 95)
Loosen the bolt (1) and detach the lens (2) from the turn
signal support.
The bulb has a bayonet-type end fitting: to remove it, push it
in and turn it counter-clockwise. Push in the new bulb and
turn it clockwise until it clicks into place. Refit the lens by
inserting the tab (A) in the corresponding slot in the turn
signal support.
Refit and tighten the bolt (1).
1
2
fig. 95

Ducati MONSTER 1100 S Specifications

General

Displacement	1078 cc
Torque	103 Nm (76 lb-ft) @ 6000 rpm
Fuel Injection	Siemens electronic fuel injection, 45 mm throttle body
Transmission	6-speed
Frame	Tubular steel Trellis frame
Front Brake	2 x 320 mm discs, 4-piston radial calipers
Rear Brake	245 mm disc, 2-piston caliper
Seat Height	810mm (31.9 in)
Engine Type	L-Twin, 2 valves per cylinder Desmodromic
Power	70 kW (95 hp) @ 7500 rpm
Front Suspension	43 mm fully adjustable
Rear Suspension	Progressive linkage
Dry Weight	169 kg
Fuel Capacity	15 L