86
6\VWHPࠉࠉࠉ)HHG
'%/'HWHFWLRQ
)HHGHU&DSDFLW\
)HHG
2))
21
6(7
([LW 2WKHUV
0$; 0,1
0,'
IMPORTANT
Double feed may not be detected if you use
rough-textured documents.
System
Make sure that the
standby
screen is displayed on
the
touch pane
l.
5HWULHYH-2%
(QWHU-2%
$GMXVW
3URFHVV
6\VWHP
(QYLURPHQW
&2817
6+76
-
+
System − Feed
1.
DBL Detection (Double feed detection)
This detects double feed (two or more sheets are
fed at once).
To use this function, touch
ON
. If not, touch
OFF
.
When it is set to
ON
, double feed is detected and
Double Feed
is displayed on the
LCD panel
.
Touch
System
.
DBL Detection (Double feed detection)
This detects double feed (two or more sheets are fed at once).
If double feed is detected and
Double Feed
is displayed on the
LCD panel
.
Feeder Capacity
The
elevator (feed tray)
level can be adjusted to three levels according to the quantity of
documents.
Batch Separation
This sets a time interval between the last process of a document and the next one.
End Mark
When you use a document with
end mark
printed on the last edge of it, the JOB fi nishes
processing a document with
end mark
printed on it.
Stack Priority
This sets speed of a fi nished product to be ejected from the exit of the machine to the
exit tray
.
Waste Box Area
This detects the
waste box full
.
To Next Page
Loading...
General