10
Preparation Before Use
Loosen the stack of the documents by fl ipping through
the sheets and align them.
Loading Documents
The height of the document stack should not
exceed the
MAX
level.
Load the documents on the
feed tray
and gently push
them toward the inside of the machine.
Make sure to loosen the stack of documents by
fl ipping through the sheets before loading them
on the
feed tray
.
Raise the
back guide
.
Set the
feed guide
according to the document width
and secure it with the
feed guide adjustment knob
.
Make sure that the feed guide does not touch the
documents with strong force or that there is no gap
between the feed guide and the documents.
IMPORTANT
IMPORTANT
REFERENCE
Documents
Documents
Feed guide
Feed guide adjustment knob
Back guide
To Next Page
Loading...
General