102
When a Document Jam Has Occurred
When a document jam has occurred, messages appear on the touch panel.
Follow the procedures below to remove the jammed document.
J02 FEED TRAY
Too many documents are loaded on the
feed tray
.
Follow the procedures below to adjust the amount of
documents to proper one.
● Do not touch the tool. Doing so may cause injury.
● Before removing the jammed document, make sure that the machine is fully stopped.
Use tweezers or
pliers to prevent your hands or fi ngers from being caught.
WARNING
-)(('75$<
)HHGWUD\RYHUORDG
WRFOHDU
Press the
elevator down switch
to lower the
feed
tray
to the bottommost position.
Remove some documents so that the height of the
document stack does not exceed the
MAX
level.
Elevator down
switch
To Next Page
Loading...
General