When folded paper edge is skewed vertically as
shown in the right illustration, correct by adjusting the
fold position of the fold knife 1 and fold knife 2.
Right illustration: Fold type is 1V.
1. Confirm that the LCD panel displays stand-by
screen.
Right illustration: When ‘JOB No.01’ is selected.
2. Press the F key to display ‘Select menu’ screen on
the LCD panel.
3. Press the CURSOR key (Down) several times to
select ‘Settings’.
4. Press the SET key to fix ‘Settings’.
1-2. Adjusting vertical fold skew
Select menu
Retrieve JOB
Enter JOB
Settings
Fold skew
Eject
direction
To Next Page
Loading...
Need help?
General
