❯
Check the function and condition of the unit
prior to every use.
❯
Do not convert or modify the unit.
❯
Comply with the specifications of the Installa-
tion and Operating Instructions.
❯
The Installation and Operating Instructions
must be accessible to all operators of the unit
at all times.
2.7 Combining devices safely
Take care when connecting units together or to
parts of other systems as there is always an ele-
ment of risk (e.g. due to leakage currents).
❯
Only connect units when there can be no
question of danger to operator or to patient.
❯
Only connect units when it is safe to do so and
when there is no risk of damage or harm to the
surroundings.
❯
If it is not 100% clear from the unit data sheet
that such connections can be safely made or if
you are in any doubt, always get a suitably
qualified person (e.g. the manufacturer) to ver-
ify that the setup is safe.
❯
Observe the specifications of IEC 60601‑1
(EN 60601‑1) when connecting the appliance
with other appliances, e.g. a PC system, both
in and outside the patient environment.
❯
Only connect peripheral units (e.g. computer,
monitor, printer) that conform at least to the
requirements set out in IEC 60950‑1
(EN 60950‑1).
A copy of the system manufacturer‘s
declaration in accordance with Article 12
of Directive 93/42/EEC can be found in
our download section at www.duerrden-
tal.com (document no. 9000-461-264).
2.8 Qualified personnel
Operation
Operating personnel are dentists and dental per-
sonnel.
They must ensure safe and appropriate handling
on the basis of their training and know-how.
❯
Instruct or have every user instructed in han-
dling the unit.
Installation and repairs
❯
Installation, readjustments, alterations,
upgrades and repairs must be carried out by
Dürr Dental or by qualified personnel specifi-
cally approved and authorized by Dürr Dental.
2.9 Electrical safety
❯
Comply with all the relevant electrical safety
regulations when working on the unit.
❯
Never touch the patient and open connectors/
contacts of the appliance at the same time.
❯
Replace any damaged cables or plugs immedi-
ately.
Observe the EMC rules concerning medical
devices
❯
Electro-magnetic interference or ESD impulses
can cause image artefacts in the images or unit
malfunction. Restart the appliance, the soft-
ware or the computer if necessary.
❯
The appliance is designed for the use in health
care establishments (in accordance with IEC
60601-1-2). If the appliance is operated in
another environment, potential effects on elec-
tromagnetic compatibility must be taken into
account.
❯
Do not operate the unit in the vicinity of HF sur-
gical instruments or MRT equipment.
❯
Maintain a minimum distance of at least 30 cm
between the unit and other electronic devices.
❯
Keep a minimum distance of 30 cm between
the unit and mobile radio devices.
❯
Note that cable lengths and cable extensions
have effects on electromagnetic compatibility.
The following accessories can have an effect on
the electromagnetic compatibility:
USB connection cable for
VistaCam iX (2.5 m) . . . . . . . . . . . . 2108-150-50
USB connection cable (2.5 m) with
12-V mains adapter . . . . . . . . . . . . 2108-150-52
Important information
9000-618-176/30 1812V009 5
EN
To Next Page
Loading...
Need help?
General
