Troubleshooting 2–8
Site Survey — Tank
1. Open the tank and inspect. Record the following on the service tag:
• Is the station lid above grade?
• Is the tank/accessway ooded? If yes, where did the water enter?
• Was the EQD below water?
• Is the Equalizer hung properly, as high in the tank as possible?
• Are other signs of inltration present?
2. Disconnect and inspect the EQD. Record the following on the service tag:
• Is the EQD dry?
• Is the EQD assembled correctly?
3. Repeat the power-off continuity checks at the EQD.
To Next Page
Loading...
