Installation - ENGLISH 59
1. Lift up the hose to the tap.
2. Screw the connector onto the threads of the tap.
Connect to an external drain
CAUTION!
• Avoid bending, kinking or squashing the drain hose.
• Do not immerse the end of the drain hose into the waste water. Immersing the hose could hamper the
drainage and cause waste water to go back into the dishwasher again.
• Do not use a drain hose extension longer than 4metres. Otherwise the cleaning performance of the
dishwasher could be impaired.
• The drain pipe connection must be at a height of less than 100cm from the base of the dishwasher.
Otherwise you must drain excess water into a suitable container held lower than the sink.
To Next Page
Loading...
Need help?
General
