EasyManuals Logo

elvita CDM2451V User Manual

elvita CDM2451V
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
Installation - ENGLISH 61
WARNING!
For personal safety:
Do not use an extension cord or an adapter plug with this product.
Do not, under any circumstances, cut or remove the earthing connection from the power cord.
Electrical requirements
Look at the rating label to check the rating voltage and connect the dishwasher to the appropriate power supply.
Use the recommended fuse (10A/13A/16A), time delay fuse, or circuit breaker.
Connect to a separate circuit that serves this product only.
Electrical connection
Ensure that the voltage and frequency of the power supply match those on the rating plate.
Only insert the plug into a power socket that is properly and reliably earthed.
Check with a qualified electrician or service representative if you are in doubt whether the product is properly earthed.
If the electrical socket to which the product must be connected is not appropriate for the plug, replace the socket with
the help of a qualified electrician.
WARNING!
Do not use adapters or the like, as they could cause overheating and fires.
Make sure that the power plug always is accessible or that a switch is incorporated in the fixed wiring in accordance
with the wiring rules, so that the product can be disconnected from the mains.
WARNING!
Ensure the dishwasher is correctly earthed before use.
Position the machine
WARNING!
Take care to avoid kinking or crushing the power cord.
If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s service agent
or similarly qualified persons in order to avoid a hazard.
CAUTION!
The machine is for indoor use only.
The machine must be installed on a flat surface.
NOTE!
The dishwasher is equipped with water supply and drain hoses that can be positioned either on the right
or the left sides to facilitate proper installation.
Depending on where your electrical outlet is, you may need to cut a hole in the side of the nearest
cabinet.
If the dishwasher must be moved, try to keep it in the vertical position. If absolutely necessary, it can be
laid on its back.

Table of Contents

Other manuals for elvita CDM2451V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the elvita CDM2451V and is the answer not in the manual?

elvita CDM2451V Specifications

General IconGeneral
Brandelvita
ModelCDM2451V
CategoryDishwasher
LanguageEnglish

Related product manuals