Installation - ENGLISH 65
4. Screw the two 110 mm long front feet onto the dishwasher.
5. Screw the 110long rear foot onto the dishwasher with a cross-head screwdriver by turning the screw.
CAUTION! The feet must not protrude more than 100mm.
6. Lift the dishwasher to a standing position.
Level the machine
Level your dishwasher by adjusting the height of the front feet and the rear foot individually.
Check if there are any feet not touching the floor. If any foot is not touching the floor: screw out the foot until it makes
contact with the floor.
To Next Page
Loading...
Need help?
General
