Emerson Affinity User Manual

Safety
Information
Product
Information
Mechanical
Installation
Electrical
Installation
Getting
Started
Basic
parameters
Running
the motor
Optimization
SMARTCARD
operation
PC tools
Advanced
parameters
Technical
Data
Diagnostics
UL Listing
Information
Affinity User Guide 103
Issue Number: 5 www.controltechniques.com
Key:
0.39 Motor pre-heat current magnitude {6.52} 0 to 100 % 0
0.40 Autotune {5.12} 0 to 2 0 to 4 0
0.41 Maximum switching frequency {5.18} 3 (0), 4 (1), 6 (2), 8 (3), 12 (4), 16 (5) kHz 3 (0)
0.42 No. of motor poles {5.11} 0 to 60 (Auto to 120 pole) 0 (Auto)
0.43 Motor rated power factor {5.10} 0.000 to 1.000 0.850
0.44 Motor rated voltage {5.09} 0 to AC_VOLTAGE_SET_MAX V
200V drive: 230
400V drive: EUR> 400, USA> 460
575V drive: 575
690V drive: 690
0.45 Motor rated full load speed (rpm) {5.08} 0 to 180,000 rpm
0.00 to
40,000.00 rpm
EUR> 1,500
USA> 1,800
EUR> 1,450.00
USA> 1,770.00
0.46 Motor rated current {5.07} 0 to RATED_CURRENT_MAX A RATED_CURRENT_MAX
0.47 Rated frequency {5.06} 0 to 3,000.0 Hz 0 to 1,250.0 Hz
EUR> 50.0
USA> 60.0
0.48 Operating mode selector {11.31} OPEn LP (1), RFC (2), OPEn LP (1) RFC (2)
0.49 Security status {11.44} L1 (0), L2 (1), Loc (2)
0.50 Software version {11.29} 1.00 to 99.99
0.51 Positive logic select {8.29} OFF (0) or On (1) On (1)
0.52 Timer 1 start date {9.35} 0 to 311299 0
0.53 Timer 1 start time {9.36} 0.00 to 23.59 0.00
0.54 Timer 1 stop date {9.37} 0 to 311299 0
0.55 Timer 1 stop time {9.38} 0.00 to 23.59 0.00
0.56 Timer 1 repeat function {9.39}0 to 6 0
0.57 Timer 1 enable {9.40} OFF (0) or On (1) OFF (0)
0.58 Timer 1 destination {9.43}Pr 0.00 to Pr 50.99 Pr 0.00
* Modes 1 and 2 are not user saved, Modes 0, 3 and 4 are user saved
Parameter
Range(
Ú) Default(Ö)
OL RFC OL RFC
Coding Attribute
OL Open loop
RFC RFC mode

Emerson Affinity Specifications

General

Brand	Emerson
Model	Affinity
Category	Controller
Language	English