EMS FirePoint 5000 User Manual

EMS 5000 FIREPOINT
ENGINEERS OPERATING GUIDE, ISSUE 3.0 – 16/08/10
9
11 Press the “YES” key and the screen will now
display:
12 Enter the required date to view in dd/mm/yy
format, (e.g.28/05/03) then press the “YES”
key and the screen will now display:
The log for the date selected can be viewed by using the “∆
∆∆
∆” & “∇
∇∇
∇” Arrows next to the
display, all fire and fault events are listed in date and time order. Using number 5 on the
keypad will take you to the oldest event, number 8 on the keypad will take you to the
latest event. (Look at the fault list for examples of descriptions that are in the log).
4. How To Disable Devices
To disable a device on the 5000 FirePoint, insert the key into the Panels Control Key
switch, located at the right of the Panel. Turn the key to the “ON”
Step Action Screen Display
No
1 With the key in the “ON” position, the screen
will display:
2 “0” key and the screen will now display:
3 Press the “∇” key until the screen displays:
4 Press the “YES” key and the screen will now
display:
5 Press the “YES” key and the screen will now
display:
6 Press the “0” key and the screen will now
display:
7 Enter the device number that you want to
Disable (e.g. 125) then press the “YES” key
and the Screen will now display:
Enter the date to
View: / /
Yes = Finish
- - - - - - - - - - - - - - - -
On 28/05/03 At 00:00
New Day of 28/05/03
Yes =
Select
Panel in Access
Date
Time
|***Options **** |
>Passwords <
|Time and Date |
Yes =Select
Time
| Logging |
>Fire System Opts<
| Remote Access |
Yes = select Time
|** Fire system ** |
>Dev. Disable/Test<
| Net. Disable/Test |
Yes= Select Time
|** Device Status * |
>Number is: 001 <
|Status is: ACTIVE|
Yes= Select Time
Enter Device
(Number 1-256)
Number > _
Yes = Finish Time
Time
|** Device Status * |
>Number is: 125 <
|Status is: ACTIVE|
Yes= Select Time

EMS FirePoint 5000 Specifications

General

Brand	EMS
Model	FirePoint 5000
Category	Control Panel
Language	English