23
AIR FLOW CONTROL
You can control the air flow by adjusting the air louver to a specific position or for continuous
oscillation.
To set a specific position, tap the air flow button and keep tapping until the louver
is in the desired position.
To set for continuous oscillation, press the air flow button once, the symbol will stay
illuminated and the louver will oscillate.
ATTENTION
In cooling and dehumidification modes, the position of the air
louver is reset every 30 minutes to prevent condensation from
forming.
CAUTION
Do not adjust the air louver manually as it can damage the
louver motor.
TEMPERATURE LIMITING (HOTEL MODE)
This mode restricts the temperature setting to 71.5°F to 82.5°F in cooling mode and 61°F to
75°F in heating mode. It also disables dehumidification mode and automatic mode.
To enable, press and hold the restricted mode button for 10 seconds (“En”
displayed).
To disable, press and hold the restricted mode key for 10 seconds.
To Next Page
Loading...
Need help?
General