Safety and operating instructions
16 © Construction Tools GmbH | 3390 5203 01 | 2019-08-06
Original Instructions
3 Overview
3.1 Equipment description
The illustration gives an overview of the main parts and
components of the hydraulic attachment. Actual details
may differ.
A. The hydraulic breaker is connected to the carrier by
the adapter plate. The adapter plate is not included
in the scope of supply of the hydraulic breaker.
B. Tank line »T«
C. Automatic lubrication system ContiLube®II
D. The cylinder cover houses the nitrogen gas (N
2
)
filled piston accumulator and the control mechanism.
E. The HP-accumulator compensates pressure varia-
tions in the hydraulic system.
F. The breaker box protects the percussion unit.
G. Working tool aperture protective cap
H. The working tool can be replaced as required. The
working tool is not included in the scope of supply of
the hydraulic breaker.
I. The DustProtector system prevents dust from en-
tering the percussion compartment (only on the
DPversion).
J. The working tool is retained in the lower breaker
part.
K. The percussion piston is guided in the cylinder.
L. Pressure line »P«
M. Non-return valve of percussion compartment venti-
lation
N. The swivel joint covers protect the swivel joints.
3.2 Function
The operation of a hydraulic breaker is described in a
greatly simplified version below:
The pressure line »P« supplies oil at the operating pres-
sure of the carrier to the hydraulic breaker. The tank line
»T« returns the oil to the tank of the carrier. The HP-ac-
cumulator compensates pressure variations in the hy-
draulic system.
The percussion piston moves up and down in the cylin-
der. When the percussion piston is in its lower position, it
impacts the working tool. The percussion energy is
transferred to the material to be broken via the working
tool.
To Next Page
Loading...
Need help?
General
