Safety and operating instructions
© Construction Tools GmbH | 3390 5203 01 | 2019-08-06
Original Instructions
63
n
Contact the Epiroc Customer Center / Dealer in your
area.
n
Professionals trained by Construction Tools GmbH
will disassemble the hydraulic breaker properly and:
–
check any parts liable to corrosion (percussion
piston, cylinder, control) for corrosion damage.
–
rework or replace corroded parts.
–
replace all sealing elements.
10.2 Working tool
n
Grease the working tool with chisel paste to prevent it
from corroding.
n
Store the working tool in a dry, properly ventilated
room.
n
Store the working tool so that it cannot topple over or
roll down.
10.3 Grease cartridges
WARNING Fire and harmful vapors
Chisel paste can burn and cause serious fire. Harmful
vapors are generated when chisel paste is burnt.
u Never store grease cartridges near fire-propagating
or self-igniting substances.
u Do not expose the grease cartridges to direct sun-
light.
n
Store the grease cartridges in a cool, properly venti-
lated room.
To Next Page
Loading...
Need help?
General
