Epiroc EC 40T User Manual

Safety and operating instructions
66 © Construction Tools GmbH | 3390 5203 01 | 2019-08-06
Original Instructions
HB4100, HB4100DP HB4700, HB4700DP
Carrier weight class
1)
40 - 70t
(88000 - 154000lbs)
45 - 80t
(99000 - 176000lbs)
Service weight
2)
4100kg (9000lbs) 4700kg (10400lbs)
Delivery weight (Standard version)
4)
3420kg (7540lbs) 3845kg (8480lbs)
Delivery weight (DustProtector version)
4)
3516kg (7750lbs) 3930kg (8660lbs)
Oil flow rate 250 - 320l/min
(66.0 - 84.5 gal/min)
260 - 360l/min
(68.7 - 95.1 gal/min)
Operating pressure 160 - 180bar
(2320 - 2610psi)
Impact rate AutoControl
(280 - 550 blows/min)
AutoControl
(280 - 540 blows/min)
Working tool diameter 180mm (7.09in.) 190mm (7.48in.)
Working length of working tool (Standard version) 750mm (30in.) 790mm (31in.)
Working length of working tool (DustProtector version) 705mm (28in.) 730mm (29in.)
Max. hydraulic input power 96kW (128.7hp) 108kW (144.8hp)
Back pressure acceptance
8)
30bar (435psi)
Gas pressure HP- accumulator (20°C(68°F)) 60bar (870psi)
Air pressure (min. gauge pressure in percussion chamber)
5)
1.5bar (22psi)
Air flow (up to depth of 10meters (33ft))
6)
6 m
3
/min (212 cfm) 7.5 m
3
/min (265 cfm)
Max static pressure (pressure relief valve on carrier) 200bar (2900psi)
Piston accumulator gas pressure (min, at operating tempera-
ture 60–70°C(140–158°F))
7)
11.7bar (170psi) 10.5bar (152psi)
Piston accumulator gas pressure (max (optimum), at operating
temperature 60–70°C(140–158°F))
7)
14.2bar (206psi) 13.0bar (189psi)
Hose inside diameter »P« 32mm (1.3in.)
Hose inside diameter »T« 32mm (1.3in.)
Start up mode IPS
1)
Weights apply to standard carriers only. Any variances must be agreed with Epiroc and/or the carrier manufacturer
prior to attachment
2)
Hydraulic breaker incl. breaker box, working tool and adapter plate of medium size. Please note that the service
weight can be considerably higher, depending on the adapter plate.
4)
Hydraulic breaker, breaker box and ContiLube
®
II without working tool and adapter plate
5)
Air pressure at pressure regulator has to be adjusted to 1.5bar + 0.1bar per meter depth (22psi + 0.5psi/ft depth)
6)
Air flow for depth of more than 10meters (33ft): Flow = 0.1 x depth[m] x flow up to 10meters [m
3
/min] (0.0305 x
depth[ft] x flow up to 33ft[cfm])
7)
Hydraulic breaker in horizontal position, no pressure applied to working tool
8)
Back pressure acceptance when breaker still runs regular but at significant reduced performance (oil flow)

Epiroc EC 40T Specifications

General

Brand	Epiroc
Model	EC 40T
Category	Industrial Equipment
Language	English