Appendix
59
Copying saved settings to other projectors
a
Disconnect the power cord from the projector, and check that all of the projector's
indicators have turned off
b
Connect the USB flash drive containing the saved batch setup file to the projector's USB-A
port
c
•
When the USB flash drive contains 1 to 3 types of batch setup files, the file for the same model
number is copied to the projector. If there are multiple files for a projector with the same model
number, the settings may not be copied correctly.
•
When there are four or more types of batch setup files on the USB flash drive, the settings may
not be copied correctly.
•
Do not store any data except for the batch setup file on the USB flash drive. If the USB flash drive
contains data other than the batch setup file, the settings may not be reflected copied correctly.
To Next Page
Loading...
Need help?
General
