Preparing
20
Attention
•
If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB
devices should be connected to the projector directly.
•
Connect a digital camera using a USB cable specified for use with the device.
•
Use a USB cable less than 3 m in length. If the cable exceeds 3 m, slideshow may not function correctly.
Connecting WirelessHD devices (EH-TW6000W only)
The projector receives transmissions from the WirelessHD Transmitter, and projects the images.
s
p.53
Change the projected image by pressing the
button on the remote control or the button on the
control panel.
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On. s Settings -
WirelessHD p.61
•
You can change which device is displayed by selecting a device from Device Connections in HDMI
Link.
s HDMI Link-Device Connections p.50