Epson EH-TW6000 User Manual

Configuration Menu
64
Function Menu/Settings Explanation
Display
Menu Position - Sets the position where the menu should be dis-
played.
Menu Color Color 1, Color 2 Selects the color for the top menu.
•
Color 1: Black
•
Color 2: Blue
Messages On, Off Sets whether or not to display the following mes-
sages (On or Off).
•
Item names for image signals, color modes, as-
pect ratios, and loading memory.
•
If the internal temperature is rising when no im-
age signal is being input or an unsupported sig-
nal is detected.
Display Background Black, Blue, Logo Selects the screen status when no image signal
is being input.
Startup Screen On, Off Sets whether or not to show a startup screen
when projection begins (On or Off). If changed,
this setting is enabled after you power off the
projector and the cool-down process is com-
plete.
Standby Confirma-
tion
On, Off Sets whether or not to display a standby confir-
mation message (On or Off).
s p.23
Input Signal
Video Signal Auto, NTSC,
NTSC4.43, PAL, M-
PAL, N-PAL, PAL60,
SECAM
Sets the signal type depending on the video de-
vice connected to the Video port. When set to
Auto, the video signal is set automatically.
If you notice noise in the image even when set to
Auto, or if you are not seeing any image at all,
select the correct signal type from the available
options.
Component Auto, YCbCr, YPbPr Sets the output signal for the video device con-
nected to the Component port.
When set to Auto, the output signal is set auto-
matically. If you notice unnatural colors when set
to Auto, set the appropriate output signal from
the available options.
Language
- Selects the display language.
Reset
Yes, No
Resets all adjustment values for Extended to
their default settings.
Memory menu
Function Explanation
Load Memory
Loads settings saved using the Save Memory function. s p.39
This cannot be selected if you have not saved any settings with the Save Mem-
ory function.
Save Memory
Saves certain Image and Signal settings to memory. s p.38
Erase Memory
Erases settings saved to memory that you no longer need. s p.39
Rename Memory
Renames a saved memory. s p.39

Epson EH-TW6000 Specifications

General

Matrix size	0.61 \
Projection distance	2.95 - 4.8 m
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	- \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	± 30 °
Aspect ratio	16:9
RS-232 ports	1
Connectivity technology	Wired
Focal length range	18.2 - 29.2 mm
Aperture range (F-F)	1.51 - 1.99
Lamp type	UHE
Lamp power	230 W
Light source type	Lamp
Service life of light source	5000 h
DVI port	No
AC (power) in	Yes
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Supported video modes	1080p
Supported graphics resolutions	1920 x 1080 (HD 1080)
RMS rated power	20 W
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
Voltage tolerance	10 %
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	274 W
Noise level	- dB
Noise level (economic mode)	24 dB

Weight and Dimensions

Weight	6000 g