Epson EH-TW9100W User Manual

Useful Functions
45
Enjoying 3D Images
Setting 3D Images
When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW9100W/EH-TW8100W only) source,
the image is automatically projected in 3D.
The following 3D formats are supported.
•
Frame Packing
•
Side by Side
•
Top and Bottom
a
Connect a video device capable of
playing 3D images to the projector.
b
Turn on the video device and the
projector, and then press the
button.
If the 3D image is projected automatically,
you do not need to press any buttons.
If the 3D image cannot be viewed
Check the following if the 3D effect is not displayed correctly, even after switching to 3D mode.
•
Check that the 3D format for the AV device and the 3D Format for the projector match. s Signal - 3D Setup - 3D
Format p.70
See the manual provided with the AV device for more information on making settings for the AV device.
•
The synchronization timing for the 3D Glasses may have been inversed. Inverse the synchronization using Inverse
3D Glasses, and then try again.
s Signal - 3D Setup - Inverse 3D Glasses p.70
•
If a 3D image is not displayed, try switching by pressing the button.
c
•
How a 3D image is perceived varies depending on the individual.
•
The image is not displayed in 3D if 3D Display is set to Off. Press the button on the remote
control.
s Signal - 3D Setup - 3D Display p.70
•
The projector automatically selects the appropriate 3D format, but if the 3D image is not displayed
correctly, use 3D Format to select another format.
s Signal - 3D Setup - 3D Format p.70
•
If the 3D effect is not displayed correctly, try reversing using Inverse 3D Glasses. s Signal - 3D
Setup - Inverse 3D Glasses p.70
•
When a 3D image is displayed, a warning about viewing 3D images is displayed. You can turn off this
warning by setting 3D Viewing Notice to Off.
s Signal - 3D Setup - 3D Viewing Notice p.70
•
You can also convert 2D images to 3D images. s p.52
•
During 3D projection, the following configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Sharpness, Split Screen, Overscan (set to Off),
Super-resolution, Frame Interpolation (set to Off)
•
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.

Epson EH-TW9100W Specifications

General

RS-232 ports	1
Matrix size	0.74 \
White light output	2400 ANSI lumens
Projection distance	- m
Projection technology	3LCD
Screen size compatibility	30 - 300 \
Projection distance (tele)	1.9 - 19.2 m
Projection distance (wide)	0.9 - 9 m
Projector native resolution	1080p (1920x1080)
Keystone correction, vertical	-30 - 30 °
Full HD	Yes
Color modes (2D)	Dynamic, Cinema
Supported 3D formats	Side by side, Top and bottom, Frame packing
Analog signal format system	-
Focus	Manual
Focal length range	23 - 47 mm
Aperture range (F-F)	2 - 3.17
Vertical lens shift range	-96.3 - 96.3 %
Horizontal lens shift range	-47.1 - 47.1 %
Lamp type	E-TORL
Lamp power	230 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	5000 h
DVI port	No
Serial interface type	RS-232
USB 2.0 ports quantity	0
Noise level	- dB
Country of origin	China
2D/3D frequency image	240/480 Hz
Noise level (economic mode)	22 dB
Placement	Desktop
Product type	Standard throw projector
Product color	White
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.39 W
Power consumption (typical)	340 W
Power consumption (economy mode)	287 W
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Pallet width	800 mm
Pallet height	2244 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	12 pc(s)
Quantity per pallet layer	2 pc(s)

Weight and Dimensions

Depth	395 mm
Width	466 mm
Height	140 mm
Weight	8400 g
Package depth	573 mm
Package width	531 mm
Package height	350 mm
Package weight	13050 g