EasyManuals Logo
Home>Epson>Projector>EH-TW9100W

Epson EH-TW9100W User Manual

Epson EH-TW9100W
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
Troubleshooting
81
Indicators Status Remedy
(blue)
Projection in pro-
gress
The projector is operating normally.
c
Under normal operating conditions, the o and m indicators are off.
When the Illumination function is set to Off, all indicators are off under normal projection conditions.
s Extended - Operation - Illumination p.75
When the Indicators Provide No Help
Check the problem
Check the following table to see if your problem is mentioned, and go to the appropriate page for information
on handling the problem.
Problem Page
Problems relating to im-
ages
No images appear.
Projection does not start, the projection area is completely black, or
the projection area is completely blue.
p.82
Moving images being projected from a computer are not projected. p.82
"Not supported" is displayed.
p.83
"No Signal" is displayed.
p.83
Images are fuzzy or out of focus. p.83
Interference or distortion appears in the images. p.84
The image is truncated (large) or small, or only a part of the image is
projected.
p.84
Image colors are not right.
The whole image appears purplish or greenish, images are black &
white, or colors appear dull.
*
p.85
Images appear dark. p.85
Projection stops automatically. p.85
Problems when projection
starts
The projector does not turn on. p.86
Problems with the remote
control
The remote control does not respond. p.86
Problems with 3D Cannot project correctly in 3D. p.87
Problems with HDMI HDMI Link does not function. p.87
The device name is not displayed under device connections. p.88
Problems with WirelessHD Cannot project WirelessHD images. p.88
Interference or distortion appear in WirelessHD images p.89
*
Because color reproduction differs between monitors and computer LCD screens, the image projected by the
projector and the color tones displayed on the monitor may not match, however this is not a fault.

Table of Contents

Other manuals for Epson EH-TW9100W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-TW9100W and is the answer not in the manual?

Epson EH-TW9100W Specifications

General IconGeneral
RS-232 ports1
Matrix size0.74 \
White light output2400 ANSI lumens
Projection distance- m
Projection technology3LCD
Screen size compatibility30 - 300 \
Projection distance (tele)1.9 - 19.2 m
Projection distance (wide)0.9 - 9 m
Projector native resolution1080p (1920x1080)
Keystone correction, vertical-30 - 30 °
Full HDYes
Color modes (2D)Dynamic, Cinema
Supported 3D formatsSide by side, Top and bottom, Frame packing
Analog signal format system-
FocusManual
Focal length range23 - 47 mm
Aperture range (F-F)2 - 3.17
Vertical lens shift range-96.3 - 96.3 %
Horizontal lens shift range-47.1 - 47.1 %
Lamp typeE-TORL
Lamp power230 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
Serial interface typeRS-232
USB 2.0 ports quantity0
Noise level- dB
Country of originChina
2D/3D frequency image240/480 Hz
Noise level (economic mode)22 dB
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningHome cinema
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.39 W
Power consumption (typical)340 W
Power consumption (economy mode)287 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Pallet width800 mm
Pallet height2244 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet12 pc(s)
Quantity per pallet layer2 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth395 mm
Width466 mm
Height140 mm
Weight8400 g
Package depth573 mm
Package width531 mm
Package height350 mm
Package weight13050 g

Related product manuals