Europe
EMC Directive 2004/108/EC EN 55022 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
Checking the Print Head Nozzles
If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify
the problem by checking the print head nozzles.
You can check the print head nozzles from your computer using the Nozzle Check utility in the printer
driver or from the printer using the control panel buttons.
Note:
When you print a nozzle check pattern, use paper with a width of 116.8 mm (4.6 inches) or more.
Using the Nozzle Check utility for Windows
Follow these steps to use the Nozzle Check utility.
1. Make sure that no lights are indicating errors.
2. Make sure that paper is attached to the tractor unit.
3. Access the printer driver. See “Using the Printer Driver” on page 26.
4. Click the Utility tab, and then click the Nozzle Check button.
5. Follow the on-screen instructions.
GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User’s Guide
Product Information 97
To Next Page
Loading...
Need help?
General