Related Information
& “Checking the SSID Connected to the Printer” on page 118
& “Checking the SSID for the Computer” on page 119
When You Cannot Connect Using Wi-Fi Direct (Simple AP)
Connection
If the maximum number of devices have already been connected, you cannot connect any more devices. See the
following and try to re-connect.
Check how many devices are connected
Check how many devices are connected to the printer. If the number of connected devices has not exceeded the
maximum, a connection error may have occurred. Move the printer and computer or smart device closer to the
wireless router to help with radio wave communication, check that the SSID and password are correct, and then
try to make network settings again.
❏ Network status sheet
User's Guide
Solving Problems
117
To Next Page
Loading...
Need help?
General
