Epson PowerLite 84 User Manual

12 Welcome
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-video signal, you’ll need an S-video cable. One
may be provided with your video equipment, or you can purchase
one from Epson; see the list on page 13.
■ To receive a component video signal from a DVD player or other
video device, you’ll need an component-to-VGA video cable. You
can purchase one from Epson; see the list on page 13.
■ To play sound through your projector you will need an audio
cable. One may be provided with your equipment, or you can
purchase one from an electronics store.
Control Panel
Opens menu system
Searches for
source image
Turns projector
on and off
Indicate
projector status
Adjusts
volume
Opens help
system
Cancel/exit
Corrects
Keystone
Corrects
Keystone
Adjusts
volume

Epson PowerLite 84 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	2000:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3
Dimensions (WxDxH)	327.6 x 248.9 x 93.9 mm
Power requirements	100-240VAC +/-10%, 50/60Hz AC
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Focal length range	18.2 - 29.2 mm
RMS rated power	10 W
Number of built-in speakers	1
Microphone in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	2
Power consumption (typical)	289 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	3100 g