Epson PowerLite 84 User Manual

36 Using the Remote Control
Operating Your Computer with the
Remote Control
If you connect a computer to the projector with a USB cable, as
described on page 42, you can use the remote control in place of your
computer’s mouse. This gives you more flexibility when delivering
slideshow-style presentations, since you won’t have to stand next to
the computer to change slides.
■ Use the Page Up and Down buttons to move through a
slideshow.
■ Use the pointer buttons to move the cursor on the screen.
■ Press the Enter button once to left-click, or press it twice to
double-click. Press the
Esc button to right-click.
■ To drag-and-drop, hold down the Enter button. Then use the
pointer buttons to drag the object. When it’s where you want
it, press
Enter to release it.
Page up or down
to change slides
in PowerPoint
Right-click
Left-click
Move cursor

Epson PowerLite 84 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	2000:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3
Dimensions (WxDxH)	327.6 x 248.9 x 93.9 mm
Power requirements	100-240VAC +/-10%, 50/60Hz AC
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Focal length range	18.2 - 29.2 mm
RMS rated power	10 W
Number of built-in speakers	1
Microphone in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	2
Power consumption (typical)	289 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	3100 g