Epson PowerLite 84 User Manual

50 Connecting to Computers and Other Equipment
Playing Sound from Video Equipment
For video equipment, use an RCA-style audio cable, which you can
purchase from an electronics store.
1. Connect the red and white plugs on one end of the cable to the
L
and
R Audio jacks on the projector.
2. Connect the red and white plugs on the other end to the
corresponding color-coded audio output jacks on your video
source.
Connecting a Microphone
You can connect a dynamic microphone to the projector’s Mic port,
using a 3.5 mm mini-jack cable as shown below.
Use the
Mic Input Volume option on the Settings menu to adjust the
volume. See page 68 for more information.
note
If you are using the
component-to-VGA cable,
you will need to connect an
audio adapter to use the
Audio1 or Audio2 jack.
Connect to
audio-out
ports for
video
equipment

Epson PowerLite 84 Specifications

General

Projection technology	LCD
Contrast ratio (typical)	2000:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3
Dimensions (WxDxH)	327.6 x 248.9 x 93.9 mm
Power requirements	100-240VAC +/-10%, 50/60Hz AC
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	6000 h
Focal length range	18.2 - 29.2 mm
RMS rated power	10 W
Number of built-in speakers	1
Microphone in	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	2
Power consumption (typical)	289 W
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	3100 g