13. Press the Left button twice to exit the control panel menus.
14. Turn off your printer and then turn it back on. Be sure to wait until the initialization is complete.
Print a network status sheet to confirm the new IP address.
Note:
❏ You must first set the IP address before using EpsonNet Config with Web Browser.
❏ See the User’s Guide for more information about settings on the printer’s control panel.
Network Setup Menu
These items are used to make network settings on the printer’s control panel.
Note:
The available settings vary depending on your printer model.
Item Settings
NETWORK SETUP Disable, Enable
IP ADDRESS SETTING* Auto, Panel, PING
IP* 0.0.0.0 to 255.255.255.254
SM* 0.0.0.0 to 255.255.255.255
GW* 0.0.0.0 to 255.255.255.255
AppleTalk* On, Off
MS Network* On, Off
Bonjour* On, Off
INIT NETWORK
SETTING*
EXECUTE
* Available only whenEnable is selected for NETWORK SETUP.
Instructions on Using a Dial-Up Router
This section describes instructions on using a dial-up router.
EPSON Network Guide
Tips for Administrator 132