❏ Setting printer port
Configuring the printer port
1. Select Connect to a printer on the Internet or on a home or office network: in the Internet printing
(IPP) wizard.
2. Enter the URL using the format below.
https://IP address of network interface:443/EPSON_IPP_Printer
Windows NT 4.0
For Windows NT 4.0, the printer driver installation procedure differs depending on the printing
method you prefer. Epson recommends printing with EpsonNet Print. See “For Windows Vista/XP/
Server 2003/2000/NT 4.0 Users” on page 104.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on page
103 for details.
1. Click Start, point to Settings, and then select Printers.
2. Double-click the Add Printers icon.
3. Select the My Computer radio button, and then click Next.
4. Click Add Port in the Add Printer wizard dialog box.
5. Select LPR Port from the Available Printer Port list, and then click New Port.
Note:
You cannot use the Lexmark TCP/IP Network Port with this network interface.
EPSON Network Guide
How To 70
To Next Page
Loading...
Need help?
General