4. Run the command prompt and then enter the following command.
NET USE printer port: \\NetBIOS name of network interface\Device name of network interface
Selecting the port
1. Click Start, and then select Printers and Faxes.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set using the NET USE command.
Encrypting print data (Secure IPP printing)
Internet printing (IPP) enables you to encrypt data to print.
Required settings
Configure the following settings using EpsonNet Config with Web Browser.
See “EpsonNet Config with Web Browser” on page 96 for details.
❏ Importing server certificate
❏ Selecting server certificate
❏ Setting encryption strength
❏ Setting printer port
Configuring the printer port
1. Select Connect to a printer on the Internet or on a home or office network: in the Internet printing
(IPP) wizard.
2. Enter the URL using the format below.
https://IP address of network interface:443/EPSON_IPP_Printer
Windows 2000
For Windows 2000, the printer driver installation procedure differs depending on the printing
method you prefer. Epson recommends printing with EpsonNet Print. See “For Windows Vista/XP/
Server 2003/2000/NT 4.0 Users” on page 104.
EPSON Network Guide
How To 64