❏ EpsonNet Config with Web Browser is a Web-based configuration utility that allows you to
configure the network interface for TCP/IP, NetWare, MS Network, AppleTalk, IPP, and SNMP.
See “EpsonNet Config with Web Browser” on page 96.
❏ EpsonNet Print is a utility that enables TCP/IP printing for Windows. (Windows Vista/XP/Server
2003/2000/NT 4.0 also support OS standard LPR printing.) See “EpsonNet Print” on page 103.
❏ Epson Firmware Updater is a wizard utility that allows you to update firmware for devices, such
as printers and network interface cards.
Visit the Epson Web site to acquire the latest version of the firmware.
Terms and Concepts
Configuration -- a prepared set of conditions for proper operation of a device. Configuring the
network interface is to prepare it to work with protocols available on a network.
DHCP -- a dynamic host configuration protocol. It is a protocol that assigns dynamic IP addresses
to devices on a network.
EtherTalk -- the communication protocol of AppleTalk governing Ethernet transmissions
ftp -- a TCP/IP application protocol for file transfer
lpd -- a TCP/IP remote printing protocol application
Print queue -- a location where a print job is stored as a file, until the network interface sends the job
to the assigned printer
Protocol -- a rule that controls how data or information is exchanged through a network. Computers
and software cannot communicate with each other using different protocols.
Remote printer -- a shared printer connected elsewhere on the network, but under the control of a
NetWare print server
TCP/IP -- Transmission Control Protocol/Internet Protocol, a layer of protocols that provides
communication between nodes on a network
SSL -- Secure Sockets Layer, a security protocol for transmitting data between a web server and a
browser
EPSON Network Guide
Introduction 17
To Next Page
Loading...
Need help?
General