2. Click the printer icon.
3. Select the zone containing the printer.
4. Select the printer name from the list.
5. Make sure AppleTalk is active.
6. Close Chooser.
Now you can use the printer on the TCP/IP network.
Installing the Printer Driver
About Installing the Printer Driver
To print to the network printer, you need to install the printer driver on the computer. See the section
in this chapter appropriate for your operating system.
Windows Vista
For Windows Vista, the printer driver installation procedure differs depending on the printing
method you prefer. Epson recommends printing with EpsonNet Print. See “For Windows Vista/XP/
Server 2003/2000/NT 4.0 Users” on page 104.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on page
103 for details.
1. Click Start, Control Panel, and then Printer.
2. Click Add a printer to start the Add Printer wizard.
EPSON Network Guide
How To 45
To Next Page
Loading...
Need help?
General