❏ Open the ADF cover and use a soft, dry, clean cloth to clean the roller and the interior of the ADF.
Cleaning the interior of the product
If your printouts are stained with ink, follow the steps below to clean the roller inside the product.
!
Caution:
Be careful not to touch the parts inside the product.
c
Important:
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the product with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is
needed.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Load several sheets of A3-size plain paper (WF-7610 Series/WF-7620 Series) or A4-size plain paper (WF-3620
Series/WF-3640 Series) in the paper cassette 1.
& “Loading Paper into the Paper Cassette” on page 33
C
Enter Setup mode from the Home menu.
D
Select Maintenance, Paper Guide Cleaning, and then follow the instructions on the control panel.
Note for the product with paper cassette 2:
If the stain does not clears, load paper in paper cassette 2, then try step 3 to 4.
User’s Guide
Maintaining Your Product and Software
140
To Next Page
Loading...
Need help?
General