Note:
Do not tilt the used maintenance box until after it is sealed in the plastic bag.
F
Insert the maintenance box into place as far as it will go.
G
For WF-7610 Series/WF-7620 Series: Close the rear cover 1.
For WF-3620 Series/WF-3640 Series: Reattach the rear cover.
Maintenance box replacement is complete.
Transporting the Product
If you move the product some distance, you need to prepare it for transportation in its original box or one of a similar
size.
c
Important:
❏ When storing or transporting the product, avoid tilting it, placing it vertically, or turning it upside down;
otherwise ink may leak.
❏ Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product
from printing.
A
Make sure the product is off.
B
Open the scanner unit.
User’s Guide
Maintaining Your Product and Software
143
To Next Page
Loading...
Need help?
General