28
Chapter 2 Setup
Installing the Printer
The printer can be placed vertically or horizontally.
❏ Vertical installation ("Placing the Printer Vertically" on page 29
)
When using strong full adhesive liner-free label paper, install the printer vertically and enable the Paper
removal standby setting.
❏ Horizontal installation (
"Placing the Printer Horizontally" on page 31)
• Place the printer on a flat surface.
• Do not place the printer in locations subject to high dust levels.
• Be careful not to place cords or foreign substances under the printer.
• Take measures to prevent the printer from moving due to vibrations when using the cash drawer.
• Do not give a high impact on the printer during operation. Doing so may cause the print failure.
• You can hang the printer on a wall by using the optional Wall Hanging Bracket Set (OT-WH30).
Refer to the manual of the Wall Hanging Bracket Set for details.
• When you have set the printer to eject printed paper from the front side, you can flip printed
pages upside down by enabling the "Batch rotate print (Upside Down)" function. For more
details, see
"Software Settings" on page 78.
To Next Page
Loading...
Need help?
General
