To Next Page

To Previous Page

With the Keyboard

1. Highlight the first item you want to select with the Arrow keys.

2. Press SHIFT+SPACEBAR to select this item.

3. Move with ARROW keys to select contiguous items between the first selected item

and the current highlighted position.

NOTE

In the specific situation where you want to use the grid view to select

clips on two different pages or banks, and/or on two different servers,

you have to:

1. open two clip tabs

2. use the contiguous selection method in one clip tab

3. use the non-contiguous selection method (even if the clips are

contiguous) in the second clip tab.

How to Select All Cameras of a Clip

You can select all camera angles of a clip when you activate the clip selection mode on

the LSM Connect.

This can be combined with the multiple selection option referred to in multiple selection

procedures. In clip selection mode, the empty positions are ignored.

With the Touchscreen

1. Check that the grid view is active in the Clip tab you will work on, otherwise

activate it by clicking the above Grid/List button.

2. Tap the Selection icon and tap Clip Select from the contextual menu (and the

Multi.Select option if required):

3. Tap a camera position holding video in the clip line you want to select.

All camera positions holding video are selected.

4. If the multiple selection mode is active, repeat step 3 to select all requested clips.

The selected elements have a blue background. The empty positions are ignored.

12 2. Common Operations

EVS Broadcast Equipment SA Issue 2.12.D- April 2020

EVS LSM Connect User Manual

Questions and Answers: