EasyManuals Logo
Home>Fuji Xerox>Printer>ApeosPort-V C5575

Fuji Xerox ApeosPort-V C5575 User Manual

Fuji Xerox ApeosPort-V C5575
463 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
3 Copy
106
Copy
3
1 Select a paper size and a paper type.
Note • Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• Drag or flick to scroll the list to switch the
screen to be displayed. For information on
how to drag or flick, refer to "Touch Screen"
(P.81).
When [Custom Size] is Selected
Enter the width and length of the original document on the fields displayed after selecting
[Custom Size].
Specify the X (width) in the range from 98 to 483 mm, and the Y (length) in the range from
89 to 320 mm in 1 mm increments.
Important • If the X (width) of non-standard size paper is less than 140 mm, documents may not be copied
properly.
• When copying on both sides of non-standard size paper, specify the size in the range from 140 to
483 mm for the X (width) direction and from 128 to 320 mm for the Y (length) direction.
1 Enter a paper size using [+] and [-] or the
numeric keypad.
2 Select a paper type.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.
• Drag or flick to scroll the list to switch the screen to be displayed. For information on how to drag or
flick, refer to "Touch Screen" (P.81).
Output Color (Selecting the Color for Copying)
This feature allows you to select copy colors.
Note • If the use of certain colors is not allowed, the available colors will be restricted. For more information,
refer to "5 Tools" > "Accounting" > "Create/View User Accounts" > "Service Access" in the
Administrator Guide.
1 Select a color mode.
îš„ Auto Detect
The machine automatically determines the
colors of the original document and makes
copies in full color if the original document is
colored, and in single color (black) if the
document is black-and-white.
Note • If a color document is in one of the following
conditions, the machine may copy the document in black and white.
- The colored area is too small.
- The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color.

Table of Contents

Other manuals for Fuji Xerox ApeosPort-V C5575

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-V C5575 and is the answer not in the manual?

Fuji Xerox ApeosPort-V C5575 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-V C5575
CategoryPrinter
LanguageEnglish

Related product manuals