Safety Notes
21
Before Using the Machine
1
Machine Installation
Breaker
Outlet
Machine’s power cables
Additional device’s power cable
When cleaning this product, always switch off and unplug it. Access to a live
machine interior may cause electric shock.
When cleaning this product, switch off the product and its switchboard (branch
circuit). Access to a live machine interior may cause electric shock.
Do not unplug or re-plug this product with the switch on. Plugging and unplugging
a live connector may deform the plug and generate heat, and eventually cause a
fire accident.
Hold the plug not the cord when unplugging this product, or it may damage the
cord and cause electric shock or a fire accident.
Switch off and unplug the product when it (i.e., fax function) is not used over
weekends or long holidays. Please note that it cannot receive fax message during
switch-off.
Once a month, switch off this product and check if
z
the power cord is plugged firmly into an electrical outlet;
z
the plug is not excessively heated, rusted or bent;
z
the plug and electrical outlet are free of dust; and
z
the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product first and
contact your local Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric
shock or a fire accident.
To Next Page
Loading...
Need help?
General
