3 Copy
164
Copy
3
Select this option when placing the top edge of the document against the left side of the
document glass or document feeder.
[Copy] Screen When Combine Original Sets is in Progress
The [Copy] screen is displayed when copying
starts.
îš„ Delete
Clears the document data stored with the
Combine Original Sets feature, and cancels
copying.
Note • You can also press the <C (Clear)> or <Clear
All> button on the control panel to perform
the same operation.
îš„ Last Original
Select this button to end scanning documents.
îš„ Next Original
Select this button when you have more documents to copy. This button is always selected
when the Combine Original Sets feature is used.
îš„ Start
After loading the next document, select this button to scan the next document.
Note • You can also press the <Start> button on the control panel to perform the same operation.
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected
Area)
This feature allows you specify the areas to be deleted from a document image. Up to three
areas can be specified.
1 Select [Delete Outside/Delete Inside].
2 Select any option.
îš„ Off
No area is deleted.
îš„ Delete Outside
Deletes the outside of the selected area.
îš„ Delete Inside
Deletes the inside of the selected area.
To Next Page
Loading...
Need help?
General
