Scan to PC
325
Scan
5
Transfer Protocol (Selecting a Transfer Protocol)
You can select a transfer protocol using the following procedure.
1 Select [Transfer Protocol].
2 Select any option.
FTP
Transfers using the FTP protocol.
SMB
Transfers using the SMB protocol.
SMB (UNC Format)
Transfers using the SMB protocol (UNC Format).
UNC stands for Universal Naming Convention and its format is as follows:
\\host name\shared name\directory name
Address Book
The following describes the Address Book.
When you select a recipient using the Address Book, the following restrictions should be
noted.
You cannot use address numbers input by the numeric keypad or group numbers to
specify the destination registered in the Address book.
Types of the Address Book
The machine provides two different ways of displaying the Address book: [Type 1] and
[Type 2]. The Address Book [Type1] or [Type2] will be displayed depending on the setting of
[Address Book Type] in the System Administration mode.
For information on how to set the Address book type, refer to "5 Tools" > "Address Book Settings" > "Address Book Type" in
the Administrator Guide.
[Type 1]
To Next Page
Loading...
Need help?
General
