Job Flow Procedure
389
Job Flow Sheets (ApeosPort Series Models Only)
7
Step 3 Confirming/Changing the Job Flow Sheet
1
To confirm the details, select [Details]. To
change the settings, select [Change Settings].
For information on how to check or change job flow settings,
refer to "Selecting/Changing a Job Flow Sheet" (P.390).
Step 4 Starting the Job Flow Sheet
1
Load a document.
Note • A job flow with an application linked does not require you to load a document.
2 Press the <Start> button.
Important • After executing the job flow, be sure to print a Job History Report to check the result. For information
on the Job History Report, refer to "5 Tools" > "Common Service Settings" > "Reports" > "Job History
Report" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
