4 Fax
182
Fax
4
z
Priority Send
z
Delay Start
z
Cover Page
z
Recipient Print Sets
z
F Code
z
Remote Folder
z
Remote Polling
z
Manual Send
z
Relay Broadcast
z
Sorting received faxes by folder (Folder Selector)
z
Direct Fax
If you are using the fax gateway feature, you can set Starting Rate and F Code. For more information on the fax gateway
feature, refer to "Sending Internet Fax to regular fax machines via a relay station" (P.185).
Sending Internet Fax
The following describes how to send Internet Fax.
Important • The Cc, Bcc, and Reply To features are not available for Internet Fax.
Note • The machine converts documents to the TIFF format and then sends them as e-mail attachments.
1 Select [Internet Fax].
2 Select [New Recipients].
3 Specify a recipient with up to 128 characters
using the keyboard displayed on the touch
screen.
Important • If you specify a fax number, the data will not
be sent.
• To specify an e-mail address for Direct
Internet Fax, use the following format:
- When specifying a host name, enter FQDN
to the right of the @ symbol.
Example: local-part@device.domain.com
- When specifying an IP address, enter the IP address with brackets ("[", "]") to the right of the @
symbol.
Example: local-part@[192.0.2.1]
To Next Page
Loading...
Need help?
General
