3 Copy
156
Copy
3
* : The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in the
orientation shown in the above table.
Paper Size and Punching Position (Finisher-B1, C3 Finisher, C3 Finisher with Booklet Maker)
z
Finisher-B1 and C3 Finisher
- 2 holes
*1
*1 : The distance between the two holes is 70 mm with the US 2/3 Hole Punch Kit, and is 80 mm with the 2/4 Hole Punch Kit,
which is normally used.
*2 : Only for the C3 Finisher
z
3 holes
z
4 holes
ID Card Copy (Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an ID
card, onto one side of paper.
2 Holes 2 Holes Top
2 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A4, A3, B4, 8 x 10"
*2
, 8.5 x 11", 8.5 x 13",
11 x 15", 8.5 x 14", 11 x 17", 8K
3 Holes 3 Holes Top
3 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8 x 10" ,
8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
4 Holes 4 Holes Top
4 Holes
Right
A4 , B5 , 7.25 x 10.5" , 8.5 x 11" , 16K
A3, B4, 11 x 15", 11 x 17", 8K
To Next Page
Loading...
Need help?
General
