5 Scan
266
Scan
5
Note • If you do not specify a file name for the document to be saved, a file name is automatically
assigned to each file or folder based on a particular rule. For example, the file name "img-
123123456" indicates that the document was scanned at 12:34:56 on January 23.
X, Y, and Z represent October, November, and December, respectively.
The following describes how to store scanned data into a folder as an example.
1 Press the <Services Home> button.
2 Select [Store to Folder].
3 If the previous settings still remain, press the
<Clear All> button.
4 Specify a folder to save the data in.
5 Select each tab, and configure features as
necessary.
The following shows the reference section for each tab.
"Store to Folder" (P.317)
"Advanced Settings" (P.332)
"Layout Adjustment" (P.336)
To Next Page
Loading...
Need help?
General
