Fax Service Settings
261
Tools
5
Transmission Screen
Set whether or not to display transmission status during transmission.
Display Fax Line Selection (Type 2 (T2) model only)
Set whether or not to enable you to select a fax line (port) on the [Fax / Internet Fax] screen.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Display Fax Line Selection
Specify whether or not to display the [Line Selection] option on the [Fax / Internet Fax]
screen.
Fax Line 1 - Name to Fax Line 3 - Name
Specify the names for each fax line.
Note • The number of lines displayed on the screen depends on the options installed on the machine.
Fax Defaults
You can set the default settings of the Fax services. When the machine is turned on, or the
machine exits from the Power Saver mode, or when the <Clear All> button is pressed, the
machine resets to the default values specified under this menu. By setting frequently used
features and values as the defaults, you can simplify operations.
For more information on each setting item, refer to "4 Fax" in the User Guide.
Resolution
Set the default value for [Resolution] in the [Fax/Internet Fax] screen.
Original Type
Set the default value for [Original Type] in the [Fax/Internet Fax] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] in the [Fax/Internet Fax] screen.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Layout Adjustment] screen.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Stamp
Set the default value for [Stamp] in the [Layout Adjustment] screen.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Skip Blank Pages
Set the default value for [2 Sided Scanning] in the [Fax/Internet Fax] and [Layout
Adjustment] screens to [2 Sided (First Page 1 Sided)].
Note • This feature is for service representative use. For more information, contact our Customer Support
Center.
To Next Page
Loading...
Need help?
General
